AEM's Performance Cold Air Intake Systems are tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.
The AEM 21-677C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filters and air intake housings. This air intake system was designed, tuned and dyno-tested to fit specific Nissan 350Z models. Air enters the system through dual oversized AEM Dryflow synthetic washable air filters for outstanding air flow, filtration and performance. The air filters are located in the original air box spaces and are protected by heat shields which are designed to reduce intake air temperature and increase horsepower. The intake tubes are constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensors and crankcase vent tube. The dual tapered cylinder shaped AEM Dryflow air filters are made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions).
- Increased Horsepower
- Tuned And DynoTested To Improve Acceleration And Engine Sound
- Low Restriction Aluminum Intake Tube
- Air Filter Lasts Up To 100 000 Miles BF Cleaning Is Required
- Washable And Reusable Oil Free Filter Media
- AEM Lifetime Limited Warranty
- Manufactured And Assembled In The USA
- Limited Lifetime Warranty
Information:
Increased Horsepower; Tuned And DynoTested To Improve Acceleration And Engine Sound; Low Restriction Tubing; Air Filter Lasts Up To 100 000 Miles BF Cleaning Is Required; Washable And Reusable Oil Free Filter Media; Comprehensive Installation Instructions; Manufactured And Assembled In The USA; Limited Lifetime Warranty
Application Summary:
| Year |
Make/Model |
| 2007-2008 |
Nissan 350Z |
| Attributes |
| ASIN |
B001DX9GOY |
| Air Box Included |
No |
| Air Filter Color |
Red |
| Air Filter Element Washable |
Yes |
| Air Filter Height |
5.25 in (133 mm) |
| Air Filter Large End Diameter |
6 in (152 mm) |
| Air Filter Material |
Non-woven Synthetic |
| Air Filter Oulet Length |
2.750 in. (70mm) |
| Air Filter Oulet Width |
2.750 in. (70mm) |
| Air Filter Outlet Length |
2.75 in (70 mm) |
| Air Filter Outlet Shape |
Round |
| Air Filter Outlet Width |
2.75 in (70 mm) |
| Air Filter Washable |
Yes |
| Alternate Part Number |
AEM-21-677C |
| CARB EO Number |
D-670-15 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Clamp Color |
Natural |
| Clamp Color/Finish |
Natural |
| Clamp Material |
Steel |
| Clamp Quantity |
8 |
| Clamp Style |
Regular |
| Clamps Included |
8 |
| Color |
Gunmetal Gray |
| Country of Origin (Primary) |
US |
| Coupler Color |
Not Applicable |
| Coupler Color/Finish |
Black |
| Couplers Included |
2 |
| Emission Code |
Legal US |
| Filter Color |
Red |
| Filter Material |
Non-woven Synthetic |
| GTIN |
00840879017910 |
| Harmonized Tariff Code (Schedule B) |
8421310000 |
| Hazardous Material Code |
N |
| Intake Pipe Color |
Gunmetal Gray |
| Intake Pipe Color / Finish |
Gunmetal Gray |
| Intake Pipe Inlet Length |
28 in (711 mm) |
| Intake Pipe Inlet Shape |
Round |
| Intake Pipe Inlet Width |
2.75 in (70 mm) |
| Intake Pipe Material |
Aluminum |
| Intake Pipe Outlet Length |
28 in (711 mm) |
| Intake Pipe Outlet Shape |
Round |
| Intake Pipe Outlet Width |
2.75 in (70 mm) |
| Intake Pipe Ports |
All intake tube ports needed for the specified applications are included |
| Item Weight |
10.300 lbs. (4.7 kg) |
| Life Cycle Status Code |
Available Only While Supplies Last |
| Mass Air Flow Sensor Adapter Included |
Yes |
| Mass Air Flow Sensor Included |
Mass Air Flow Sensor Adapter Included When Required |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
B |
| Oil Included |
No, No Filter Oil Required |
| Package Material |
Paperboard |
| Package Type |
Box |
| Product Box Height |
11.600 in. (295mm) |
| Product Box Length |
24.380 in. (619mm) |
| Product Box Width |
12.200 in. (310mm) |
| Product Style |
AEM Cold Air Intake System |
| Replacement Filter |
21-202DK |
| SDR Required Flag |
N |
| Standard Pack |
1 |
| Street Legal |
Yes |
| Street Legal In All US States |
Legal for use in all 50 states. |
| System Type |
Cold Air Induction |
| TUV Approved (Europe) |
No |
| Warranty |
Limited Lifetime |
| Weight |
10.3 lb (4.7 kg) |
